China Popular Brand 1T Hydraulic Small Digger Machine Mini Excavator
Quick Detail:
1. New design of appearance
It's made of die-formed covering parts by stamping, with beautiful appearance and hig2.Design of reinforced boom,arm and bucket
Improve structure, disperse stress, improve stability and durability of structure, Cold&warm air conditioner supply under different kinds of weather conditions
3. Tailless slewing & boom sway
Two major functions are provided at the same time, and barrier free construction is available in complex environment (wall root, pipeline, indoor, etc.)
4. Three-pump hydraulic system with dual pump and dual circuit, stable work performance, fast speed.
Four linkage can be realized to ensure the simultaneous operation of bucket, boom, arm and rotation, and the operation is fast and smooth
5. GPS satellite position and remote diagnose system(optional) and Light and handy pilot operating system
6. Using YANMAR engine, in-line four strokes, low fuel consumption, environmental protection, convenient repair and maintenance.
7. Electronic monitoring using a dot matrix type advanced multifunctional large screen liquid crystal display, electronic throttle control system has the function of throttle control, automatic idle speed, overheat protection, speed acquisition.
8. The machine adopted new type cab with wide field of vision, new seat, and automatic regulated air conditioning system, make the operation flexible and comfortable.
The concept of low noise, ensure the operator to manipulate more comfortable and safety.
Specifications:
| Specifications |
| Engine | CHANGCHAI192 |
| Bucket Capacity | 0.03m³ |
| Engine Power | 12HP |
| Maximum Digger height | 2490MM |
| Maximum Unloading Height | 1800MM |
| Maximum Digging Depth | 1600MM |
| Grounding Specific Voltage | 22KPA |
| Size | 2900*950*2020MM |
| Minimum Ground Clearance | 300MM |
| Track Width | 180MM |
| Chassis Width | 950MM |
| Track Length | 1200MM |
| Maximum Digging Range | 4200MM |
| Minimum Turning Radius | 1190MM |
| Climbing Ability | 35° |
| Walking Speed | 3KM/H |
Notices:
1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.
5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.
6. Do not lift materials with buckets.
7. When the abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.
8. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.
9. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.
10. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.
Applications:
The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming and pile pulling.
Our Service:
We support OEM/ODM service, we have professional develop research department, like designs, colors, and also products all can be acceptable customized, we have 3 times supervise on quality control through production line before send out. And quality and service is our first principle of company.We keep 12 months warranty, beyond the warranty period, all spare parts offered to you with our cost price (not including freight).By the way, we support 24Hour customer service by email or phone. Please feel free to contact, we are willing to become your friend and business partner.
Product Tags:
|
|
SGS 1 Ton Mini Excavator Equipment 3KM/H Walking Speed Small Digger Machine Images
|
